Aviator

The resort razor
Ideal for expert freestyle and all-mountain carving
Directional All-Mountain
Shape
- Traction Tech
- Blunt Nose
- Progressive Sidecut
- Directional Twin
Flex
- Stiffness: 8/10 - Precise
- V-Core
- Directional flex pattern
IMG/png/aviator-4.png
IMG/png/aviator-flipflop.png
IMG/png/jones1920-aviator-topsheet.png
IMG/png/jones1920-aviator-nose.png
CHF 699.95

The Aviator is an elite all-mountain directional twin built for experienced riders who like to carve hard and take to the air with confidence.

The Aviators’s nimble handling and supersonic acceleration result from the 3D Contour Base 2.0, Traction Tech 2.0 edges plus the Power Camber profile. Power Camber keeps you locked in and railing hard while the spooned tips on the 3D Contour Base 2.0 help eliminate catch and improve turn fluidity. The Triax Carbon Innegra layer under the Eco-Plastic topsheet sucks up board chatter and offers supreme pop and lightning fast response to any rider energy input. New for 2020, the Aviator is built with an FSC Power core that is specially profiled between the feet for added pop.

 


Personality

 


Traction Tech

Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Traction Tech is a critical feature for rockered boards. Rocker improves glide in mixed conditions, but the decreased edge contact makes it harder to really lock
into your turns and hold a solid edge. Traction Tech is crucial to offset the edge drift of rocker. — Jeremy Jones

Directional Twin
Progressive Sidecut
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
Blunt Nose
How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. — Jeremy Jones
Flip Flop Base
Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.
Sintered 9900
Made from Ultra-High Molecular Weight ­Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.
Wend Natural Wax
Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.
Triax Fiberglass
Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.
Factory Tuned
All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
Recycled ABS Sidewalls
ABS Plastic is one of the necessary evils of snowboard production. We improve the sustainability of our snowboards by using only recycled plastic.
Oversized Recycled Edges
All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.
Carbon / Innegra Reinforcement
New Carbon Innegra fiber forms an ultra-tough hybrid composite layer that dampens the board torsionally and from tip to tail. Made in the USA and featured on the Aviator, Airheart and Lone Wolf.
Super Sap Bio Resin
All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.
Eco Plastic Topsheet (matt)
Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet)
FSC™ Power Core
Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.
Gear 101
Twin boards can be ridden shorter than a Directional Freeride board, unless you plan to ride the Twin in deep pow.
For steeps and park riding, size your Twin 2 - 3 cm shorter than your Directional Freeride board.
Choose the ideal size Directional Twin board using your weight and boot size (see the size chart below).
 
 
If you wear US Men’s 11.5 or bigger, look for our Big Horn series boards with minimum waist width 26.3 cm.
Not sure your ideal snowboard size? Check out our sizing guidelines for each model.
 

 
Know your board
The dimensions of a snowboard define how that board performs on snow. The dimension specs of all our models are fine tuned for specific styles of riding.
Understand how waist width, flex and sidecut and stance dimensions effect board performance to find the best board for you.
 
 

 
Size Chart
Product Size Weight Range (lbs/kg) Bindings Recommended Size Weight / Production tolerance +/- 15% Big Horn Series Effective Edge Length Nose Length (cm) Tail Length (cm) Nose Width (cm) Waist Width (cm) Tail Width (cm) Taper Sidecut (m) Reference Stance (cm) Centered Stance (cm) Setback (cm)
152 130-180 lbs / 59-82 kg S/M 2,7 kg / 5,9 lbs 114.2 24.9 23.9 28.9 24.8 28.9 0 7.4 56 54 2
156 140-190 lbs / 64-86 kg S/M 2,6 kg / 5,7 lbs 117.2 25.4 24.4 29.41 25.3 29.4 0 7.8 58 56 2
158 150-200 lbs / 67-91 kg S/M 2,8 kg / 6,1 lbs 119.2 25.4 24.4 29.55 25.3 29.54 0 7.795 60 58 2
158w 150-200 lbs / 67-91 kg M/L 2,8 kg / 6,1 lbs 119.2 25.4 24.4 29.9 25.7 29.9 0 7.9 60 58 2
160 150-200 lbs / 67-91 kg M/L 2,8 kg / 6,1 lbs 121 25.5 24.5 29.68 25.4 29.68 0 8 60 58 2
160w 150-200 lbs / 67-91 kg M/L 2,9 kg / 6,3 lbs 121 25.5 24.5 30.18 26 30.17 0 8.2 60 58 2
162 160-210 lbs / 73-95 kg M/L 2,8 kg / 6,1 lbs 122.8 25.6 24.6 29.81 25.5 29.8 0 8.2 60 58 2
164 170-220+ lbs / 77-100+ kg M/L 3,0 kg / 6,6 lbs 124.6 25.7 24.7 30.54 26.2 30.53 0 8.4 60 58 2

 

Next level technology for ultimate response
Glide. Flow. Float.
3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.

I’ve been on a quest to design a snowboard that offers the friction free glide and edge-to-edge fluidity of a surfboard for years. 3D Contour bases finally cracked the code on how to achieve this next level of board performance. Jeremy Jones

 

gallery

High Performance, Sustainably Made Gear
We design gear that balances performance, durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2020, all our snowboards and splitboards features 100% FSC wood cores and are molded with Super Sap Bio-Resin.
Proud member of 1% For The Planet, we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.