How-To: Trim Splitboard Climbing Skins And Install Universal/Quick Tension Tail Clip
Skins climb best if the majority of the split ski is covered almost edge-to-edge with only the width of the edge exposed on each side. It is important to leave the edge exposed for edging on icy, firm snow. If your skins are too narrow and there is a lot of base showing on each side they may be slippery in certain snow conditions. If your skins are too wide and the edges are covered the skins may be slippery on firm snow.
Jones Nomad and Nomad Pro Universal skins are trim-to-fit so they must be custom cut to your board before use.
Tail clips work best when they require a little tension to fit on to your board. You don’t want them so tight that they are pulling the skin off the base but a little tension can help the glue stick to the ski.
Watch this video for complete instructions on how to trim your Jones splitboard climbing skins and install the Universal Tail Clips (the installation of the Quick Tension Tail Clip is identical) :
(Skip to 1:30 in video for Universal tail clip installation instructions (The installation of the Quick Tension Tail Clip is identical)
Follow these instructions for adjusting quick tension clip:
1 - Attach skin to splitboard nose.
2 - Slide clip along tail strap and position so clip is at bottom of notch in tail.
3 - Slide end of tail strap into clip, securing clip in place on tail strap.
4 - Stretch tail strap and fix clip into notch with medium tension. Clip/strap does not need a lot of tension, just enough to hold securely in notch.
7 March 2016
Jones Present: Cast & Carve
Words by Dave Faustini / Photos by Andrew Miller / Video by Greg Weaver Fishing and snowboarding are synonymous with life for many who reside in this corridor known as the Eastside. Jimmy Goodman and I are no exception here. We are dedicated...
100% Boards Built With Super Sap Bio Resin + FSC Wood Cores
Since our first boards rolled out of the press in 2010 we have strived to balance the qualities of performance, durability and sustainability in our production. We recognize that our manufacturing has an impact on the environment so we use as...
Introducing The 2019/20 Binding Collection
While board and boot performance always get heavy consideration, binding performance is often slept on. Any two straps and a highback may get you down the hill, but not all bindings ride the same. When you are strapped into a binding that’s...
Introducing The Frontier + Frontier Split
New Name, Same Playful Freeride Spirit Excited to introduce the newly re-named Jones Frontier and Frontier Split. Formerly named the Explorer, the Frontier is a directional freeride board designed to be the perfect daily driver for the creative...
Introducing The 2019/20 Flagship
Ten years at the forefront of freeriding Since 2010, the Flagship has defined freeride performance as one of the most confidence inspiring snowboards on the planet. Refining the Flagship design year after year, it has also come to define our...
Introducing The 2019/20 Mountain Safety Collection
The rewards of backcountry snowboarding can be beyond your wildest dreams, but so can the ugly realities of the risks. Avalanche danger in backcountry terrain is a serious threat to your life and the lives of your backcountry partners. When you...