Free Shipping over $75 - Sale! Save up to 30%

Jeremy Jones’ brings surf-inspired designs to snow with new SPOON TECH.

On a surfboard, the subtle shaping of the nose is what makes the entry into a turn so smooth and fluid. The feeling of an effortless surf turn is what inspired the development of SPOON. Instead of having to abruptly tip the board into a turn, SPOON lets you roll your edge into a turn. I’ve been on a quest to design a snowboard that has the glide and edge-to-edge fluidity of a surfboard for years. Our new Spoon base contours finally cracked the code on how to achieve this next level of performance.
- Jeremy Jones

Have you ever groveled through a powder gully marveling at another rider’s track high on the walls but you can’t get up there? It’s likely more than just your wax job that’s holding you back. Speed is always a direct result of how your snowboard glides and floats through the snow. When your board is gliding fast you can accelerate quicker, maintain speed and make smoother turns.

Forrest Shearer detonates a slash testing SPOON in Chile.

GLIDE.

Our new SPOON 3D-base contours were specifically designed to provide next-level glide. The smooth radius of the SPOON nose and tail edges reduce friction at the contact points. With less friction and catch in the tips you can maintain more speed.

Forrest Shearer rips a line in Chile.

FLOW.

SPOON delivers unmatched turn flow and fluidity. Just like the nose and tail on a surfboard the rounded tip and tail edges eliminate any catch as you transfer pressure edge-to-edge. Turn initiation is effortless with the SPOON. Once on edge the camber and mellow magne-traction locks in your turn.

Jeremy Jones floats out of the white room.

FLOAT.

When a board has good float it should feel effortless to keep your nose up through pow, crud or crust without burning out your back leg. SPOON 3D-base contours improve float by reducing the “plow effect” of your nose and tail edges. Instead of plowing through the snow, the rounded edges smoothly deflect the snow to the sides of the board which pops your nose up without having to lean back.

The tail on the 2017 Hovercraft and Ultracraft solid features a concave speed channel hull mid-board and raised outer edge wings.

The unique riding personality of each board in our collection demanded we develop multiple 3D-base contour patterns. Not every model would benefit from the same amount of Spoon. Each 3D-base contour pattern is matched to the attitude of the board. There are four different versions of SPOON.

SPOON 4.0

Drawing of the Storm Chaser

Our most advanced 3D-base contour pattern featuring our maximum spoon bevel in the nose, moderate spoon bevel in the tail and a shallow Speed Channel between the tail edges. The concave Speed Channel pushes loose snow out from under the board for added speed.

Featured on: Hovercraft, Ultracraft, Storm Chaser. Drawing of the Hovercraft 156 cm.

SPOON 3.0

Drawing of the Flagship, size 161

Freeride focused 3D-base contours featuring an even balance of our maximum spoon bevel in the nose and the tail. Spoon bevel starts at the rocker point.

Featured on: Flagship, Women’s Flagship, Carbon Flagship. Drawing of Flagship 161 cm.

SPOON 2.0

Drawing of the Aviator, size 158

Moderate 3D-base contours featuring an even balance of spoon bevel in the nose and the tail. Spoon bevel starts at the rocker point.

Featured on: Project X, Aviator, AirHeart. Drawing of the Aviator 158 cm.

SPOON 1.0

Drawing of the Explorer, size 159

Subtle yet effective 3D-base contours featuring an even balance of spoon bevel in the nose and the tail. Spoon bevel starts just after the rocker point.

Featured on: Explorer, Discovery, Prodigy. Drawing of the Explorer 159 cm.

Share Story
Published on
29 August 2016
22
May
Adventure Season
Spring Snow Camping Tips
Story by Nick Russell Sleeping in the mountains is paradise. Walking into the backcountry and carrying everything you need to survive brings a gratifying sense of self-sustainability and strength. Although it can take a great amount of effort...
Nick Russell
10
May
Adventure Season
Spring Shred Tips - Board Tuning + Terrain Selection
Forrest Shearer slides into a spring sunset in Iceland. Photo - Andrew Miller. Not as many chairlifts spinning these days, but there is no denying that shred season is still alive and well in the Northern Hemisphere. The Western US and Rockies...
Seth Lightcap
30
Apr
Meet The Team
Jones Ambassador Riding Stances
Since the pioneering days of the sport, different snowboard stances have defined different snowboard styles. Some stances are better for carving, other stances are better for stomping airs and riding switch. Finding the stance that best fits...
Seth Lightcap
22
Apr
Be 1% Better
Start small, think big, make a difference Since the very first Jones board popped out of the press in 2009, every board we’ve ever made was built with recycled steel edges and recycled ABS sidewalls. We use only a couple meters of material in...
6
Mar
Trip Reports
Hunza - Splitboarding In Pakistan With Julien ’Pica’ Herry
Story By Julien ’Pica’ Herry. Photos By Jeremy Bernard. Jones Ambassador Guide Julien ’Pica’ Herry shares the story behind Hunza, the new adventure film by Invade Media documenting the magnificent mountains and culture of the Hunza Valley in...
Julien ’Pica’ Herry
26
Feb
Meet The Team - Videos
Out Here Ep. 2 - Splitboarding In The Wasatch With Chris Coulter
Thrilled to debut the second episode of the OUT HERE video series! Made in partnership with Spark R&D, the OUT HERE series shares the backcountry snowboarding adventures of Jones x Spark R&D ambassadors as they explore the outer reaches...
Chris Coulter