Free Shipping over $75

Splitboard 101

Adjusting Tip, Tail and Split Clips

If your splitboard is new you should not need to adjust your tip, tail or split clips. All clips should slide smoothly and the board should feel securely locked together when clips are closed.

If your splitboard is used and the split clips (clips between bindings and tip/tail) are not pulling the board halves tightly together, you can adjust the clip tension. To adjust loosen one half of the clip and spread halves further apart.

Tip and tail clips should require no maintenance unless clip is damaged or broken.

Splitboard Interface Set-Up

Setting up your splitboard for the very first time doesn’t have to be tricky. The key is to have the right tools and follow the installation instructions for which ever splitboard interface kit that you have - Karakoram, Spark R+D or Voile.

Tools needed: Tape Measure, 4mm Metric Allen Wrench, Large Philips Screwdriver.

Follow instructional videos for stance and interface set-up.

Karakoram Prime Interface

Karakoram Split30 Interface

Spark R + D Interface

Voile Interface