Skins climb best if the majority of the split ski is covered almost edge-to-edge with only the width of the edge exposed on each side. It is important to leave the edge exposed for edging on icy, firm snow. If your skins are too narrow and there is a lot of base showing on each side they may be slippery in certain snow conditions. If your skins are too wide and the edges are covered the skins may be slippery on firm snow.

Jones Nomad and Nomad Pro Universal skins are trim-to-fit so they must be custom cut to your board before use.

Tail clips work best when they require a little tension to fit on to your board. You don’t want them so tight that they are pulling the skin off the base but a little tension can help the glue stick to the ski.

Watch this video for complete instructions on how to trim your Jones splitboard climbing skins and install the Universal Tail Clips (the installation of the Quick Tension Tail Clip is identical) :

(Skip to 1:30 in video for Universal tail clip installation instructions (The installation of the Quick Tension Tail Clip is identical)

Follow these instructions for adjusting quick tension clip:

1 - Attach skin to splitboard nose.
2 - Slide clip along tail strap and position so clip is at bottom of notch in tail.
3 - Slide end of tail strap into clip, securing clip in place on tail strap.
4 - Stretch tail strap and fix clip into notch with medium tension. Clip/strap does not need a lot of tension, just enough to hold securely in notch.

Share Story
Published on
7 March 2016
22
May
Adventure Season
Spring Snow Camping Tips
Story by Nick Russell Sleeping in the mountains is paradise. Walking into the backcountry and carrying everything you need to survive brings a gratifying sense of self-sustainability and strength. Although it can take a great amount of effort...
Nick Russell
10
May
Adventure Season
Spring Shred Tips - Board Tuning + Terrain Selection
Forrest Shearer slides into a spring sunset in Iceland. Photo - Andrew Miller. Not as many chairlifts spinning these days, but there is no denying that shred season is still alive and well in the Northern Hemisphere. The Western US and Rockies...
Seth Lightcap
30
Apr
Meet The Team
Jones Ambassador Riding Stances
Since the pioneering days of the sport, different snowboard stances have defined different snowboard styles. Some stances are better for carving, other stances are better for stomping airs and riding switch. Finding the stance that best fits...
Seth Lightcap
22
Apr
Be 1% Better
Start small, think big, make a difference Since the very first Jones board popped out of the press in 2009, every board we’ve ever made was built with recycled steel edges and recycled ABS sidewalls. We use only a couple meters of material in...
6
Mar
Trip Reports
Hunza - Splitboarding In Pakistan With Julien ’Pica’ Herry
Story By Julien ’Pica’ Herry. Photos By Jeremy Bernard. Jones Ambassador Guide Julien ’Pica’ Herry shares the story behind Hunza, the new adventure film by Invade Media documenting the magnificent mountains and culture of the Hunza Valley in...
Julien ’Pica’ Herry
26
Feb
Meet The Team - Videos
Out Here Ep. 2 - Splitboarding In The Wasatch With Chris Coulter
Thrilled to debut the second episode of the OUT HERE video series! Made in partnership with Spark R&D, the OUT HERE series shares the backcountry snowboarding adventures of Jones x Spark R&D ambassadors as they explore the outer reaches...
Chris Coulter