Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board. “Traction Tech is a critical feature for rockered boards. Rocker improves glide in mixed conditions, but the decreased edge contact makes it harder to really lock into your turns and hold a solid edge. Traction Tech is crucial to offset the edge drift of rocker.”
- Jeremy Jones

At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the side cut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.

“How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight.” - Jeremy Jones

A multi-layered aramid fiber that absorbs shock and improves pop. The fiber’s diamond pattern adds strenght and torsional stiffness.

A durable, sustainable and high performance dampening fiber.

Specially designed carbon fiber (12k non crimp fabric) that is podium proven in the America’s Cup and Tour De France. TeXtreme achieves a weight savings of about 20-30% compared to conventional ­carbon fiber.

A multi-layered tri-axis fiberglass meshed with carbon fiber power bands. Carbon power bands dampen vibrations and keep board stable at speed.

Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.

GLIDE

Our new SPOON 3D-base contours were specifically designed to provide next-level glide. The smooth radius of the SPOON nose and tail edges reduce friction at the contact points. With less friction and catch in the tips you can maintain more speed.

FLOW

SPOON delivers unmatched turn flow and fluidity. Just like the nose and tail on a surfboard the rounded tip and tail edges eliminate any catch as you transfer pressure edge-to-edge. Turn initiation is effortless with the SPOON. Once on edge the camber and Traction Tech locks in your turn.

FLOAT

When a board has good float it should feel effortless to keep your nose up through pow, crud or crust without burning out your back leg. SPOON 3D-base contours improve float by reducing the “plow effect” of your nose and tail edges. Instead of plowing through the snow, the rounded edges smoothly deflect the snow to the sides of the board which pops your nose up without having to lean back.

Jones Snowboards 2017 - Jeremy Jones Explains SPOON

Our most advanced 3D-base contour pattern, SPOON 4.0, features a Speed Channel between the tail edges. The concave channel pushes loose snow out from under the board for added glide and speed.

The unique riding personality of each board in our collection demanded we develop multiple 3D-base contour patterns. Not every model would benefit from the same amount of Spoon. Each 3D-base contour pattern is matched to the attitude of the board.

Our most advanced 3D-base contour pattern featuring distinct spoon bevel in the nose, moderate spoon bevel in the tail and a shallow Speed Channel between the tail edges. The concave Speed Channel pushes loose snow out from under the board for added speed.

Freeride focused 3D-base contours featuring an even balance of spoon bevel in the nose and spoon bevel in the tail. Spoon bevel starts at the rocker point.

Moderate 3D-base contours featuring an even balance of spoon bevel in the nose and spoon bevel in the tail. Spoon bevel starts at the rocker point.

Subtle yet effective 3D-base contours featuring an even balance of spoon bevel in the nose and spoon bevel in the tail. Spoon bevel starts just after the rocker point.

Click and hold Slider to see changes

BOLT-LESS BRIDGE Splitboard Connection

Carbon stringers add torsional stiffness for improved response and increased pop. Carbon layer keeps flex profile dimensionally stable for a consistent ride for the lifetime of the board.

Fiberglass layer improve pop in nose and tail plus increases the longevity of the flex profile. This lightweight layer helps the board perform the same on day 100 as it did on day one - precise and playful.

Natural Pre-Cured Basalt stringers transfer power from under your feet to the tips of the board to help eliminate nose and tail chatter.

Dual-density full premium wood poplar and paulownia core designed to maximize lightness and dampening.

Dual-density full wood core with hardwood bamboo stringers for added pop and durability.

Featured on

Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Triple-density core featuring stringers of ISOCORE - a foam/fiberglass composite that’s as stiff as any wood but 15% lighter. Hardwood beech stringers are positioned along the edges for added durability.

Our new triple density Bamboo Surf wood core that has bamboo stringers positioned in the pocket of the sidecut for better edge response and turn power.

Custom tip/tail rocker profile designed by surf shaper Chris Christenson for the Mountain Surfer and Storm Chaser. The nose rocker starts just inside of the front inserts and the tail rocker starts just at the back inserts. When you weight the tail of the board the nose ramps up out of the snow for insane float on the deepest days.
These subtle rocker contours match a Christenson surfboard rocker profile.

Custom tip/tail rocker profile designed by surf shaper Chris Christenson for the Mind Expander and StormChaser. The nose rocker starts just inside of the front inserts and the tail rocker starts just at the back inserts. When you weight the tail of the board the nose ramps up out of the snow for insane float on the deepest days. These subtle rocker contours match a Christenson surfboard rocker profile.

Featured on
A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls.

A unique rocker/camber flex pattern defined by evenly balanced tip and tail rocker and camber between the bindings. CAMROCK improves freestyle finesse by keeping your tips playful while maintaining the power and pop of camber underfoot.

An innovative traditional camber profile tweaked to offer the insane edge response of camber without the usual hang-ups. The camber radius tapers to flat toward the tips and the base is beveled up one degree at the edges from the contact points of the camber to the ends of the board. The base beveling releases the edges where they like to hook which balances the pop and directional stability of camber with a looser, less-catchy feel.

World Cup proven race base made from ­Ultra-High Molecular Weight Polyethylene (UHMW-PE) modified with special Fluoro and Paraffin based additives for better glide and increased durability. ULTRA base is harder and faster than any other ­sintered base.

Made from Ultra-High Molecular Weight ­Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.

Classic base material built for durability.

Featured on

Jones exclusive production process allows traditional topsheet layer to be replaced with ultra durable epoxy layer saving weight and material.

Thin wood veneer layer offers even flex and sucks up chatter from uneven snow conditions.

Featured on

Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Film topsheets provide the stiffness and impact resistance of a normal topsheet while significantly reducing weight by decreasing the thickness of the topsheet material.

ULTRA clips are lower profile, stronger and increase compression between board halves.

Jones Splitboards feature Karakoram K-clips plus tip and tail hooks. Adjustable tension K-clips increase board torsional stiffness.

Tyring to find your correct size? Big Foot? Check out our guidelines for each models.

Tyring to find your correct size? Big Foot?
Check out our guidelines for each models.