Custom tip/tail rocker profile designed by surf shaper Chris Christenson for the Mountain Surfer and Storm Chaser. The nose rocker starts just inside of the front inserts and the tail rocker starts just at the back inserts. When you weight the tail of the board the nose ramps up out of the snow for insane float on the deepest days.
These subtle rocker contours match a Christenson surfboard rocker profile.
A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.
My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls.
A unique rocker/camber flex pattern defined by evenly balanced tip and tail rocker and camber between the bindings. CAMROCK improves freestyle finesse by keeping your tips playful while maintaining the power and pop of camber underfoot.
An innovative traditional camber profile tweaked to offer the insane edge response of camber without the usual hang-ups. The camber radius tapers to flat toward the tips and the base is beveled up one degree at the edges from the contact points of the camber to the ends of the board. The base beveling releases the edges where they like to hook which balances the pop and directional stability of camber with a looser, less-catchy feel.