Jones Men's Ultra Flagship Snowboard

  • -30%

Only for the expert freerider

Ideal for high speed freeriding and freeride competitions

The Ultra Flagship is a seriously stiff, competition-ready directional freeride board designed for expert freeriders who like to crush steep terrain at top speed. The Ultra Flagship has a tapered shape for epic float in pow and a 3D Contour Base 3.0 plus Traction Tech 3.0 edges for effortless turn initiation and exceptional edge control on firm snow.

Key Benefits

Key Benefits

  • Stiff flex for power and response
  • Tapered directional shape for nimble float
  • Directional rocker profile for float + grip
  • Long sidecut for stability at speed
  • 2x Carbon Stringers and Ash Veneer Topsheet to absorb chatter in rough snow
  • 3D Contour Base for ultra fast glide and fluid turn intiation

Terrain

On-Piste / All-Mountain 9/10

Freeride / Powder 10/10

Freestyle / Park 5/10

On-Piste / All-Mountain 9/10

Freeride / Powder 10/10

Freestyle / Park 5/10

Riding Level

Beginner

Intermediate

Expert

Personality/Flex

Soft & Playful

Happy Medium

Stiff & Powerful

Speed & Turn shape

Slow & Short

Do-It-All Turner

Fast & Long

Environmental and social responsibility

Proud member of 1% For The Planet Proud member of 1% For The Planet
Built with 100% solar power Built with 100% solar power
Bio Resin Bio Resin
100% recycled ABS 100% recycled ABS
Wend Bio Wax Wend Bio Wax
Sustainably sourced woodcores Sustainably sourced woodcores

Proud member of 1% For The Planet

Your purchase supports grassroots organizations. We donate 1% of every sale to environmental causes though our partnership with 1% For The Planet.

Built with 100% solar power

As of May 2020, all Jones snowboards and splitboards are made with 100% solar power. Switching our snowboard and splitboard production to 100% solar made a 89% reduction in CO2 compared to non-solar powered production.

Bio Resin

Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes.

100% recycled ABS

Since 2014, all of our snowboards and splitboards have been built with recycled ABS sidewalls. We've used 847 miles of sidewalls since switching to recycled ABS.

Wend Bio Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with Wend natural wax, a plant blend and biodegradable wax that is also non-toxic.

Sustainably sourced woodcores

All Jones woodcores are made with sustainably sourced wood. Every piece of wood we use in every board comes from a responsibly managed forest.

Men's Ultra Flagship Snowboard

$1,200.00
$840.00 -30% Save: $360.00

Help find my size
Size chart

SKU: J.24.SNM.UFL.XX.161.1

flake

This order ships free!

Free 2-5 days shipping for all orders over $75

check delivery dates.

All Jones snowboards and splitboards are backed with a 2 year warranty + 1 free year extension.

Learn more

Designed to work together

Designed to work together

mix and match

The flex and response on the Men's Apollo Snowboard Binding has been tuned to enhance the signature turn performance and board feel of the Men's Ultra Flagship Snowboard.

Only for the expert freerider

Ideal for high speed freeriding and freeride competitions

The Ultra Flagship is a seriously stiff, competition-ready directional freeride board designed for expert freeriders who like to crush steep terrain at top speed. The Ultra Flagship has a tapered shape for epic float in pow and a 3D Contour Base 3.0 plus Traction Tech 3.0 edges for effortless turn initiation and exceptional edge control on firm snow.

Key Benefits

Key Benefits

  • Stiff flex for power and response
  • Tapered directional shape for nimble float
  • Directional rocker profile for float + grip
  • Long sidecut for stability at speed
  • 2x Carbon Stringers and Ash Veneer Topsheet to absorb chatter in rough snow
  • 3D Contour Base for ultra fast glide and fluid turn intiation

Terrain

On-Piste / All-Mountain 9/10

Freeride / Powder 10/10

Freestyle / Park 5/10

On-Piste / All-Mountain 9/10

Freeride / Powder 10/10

Freestyle / Park 5/10

Riding Level

Beginner

Intermediate

Expert

Personality/Flex

Soft & Playful

Happy Medium

Stiff & Powerful

Speed & Turn shape

Slow & Short

Do-It-All Turner

Fast & Long

Environmental and social responsibility

Proud member of 1% For The Planet Proud member of 1% For The Planet
Built with 100% solar power Built with 100% solar power
Bio Resin Bio Resin
100% recycled ABS 100% recycled ABS
Wend Bio Wax Wend Bio Wax
Sustainably sourced woodcores Sustainably sourced woodcores

Proud member of 1% For The Planet

Your purchase supports grassroots organizations. We donate 1% of every sale to environmental causes though our partnership with 1% For The Planet.

Built with 100% solar power

As of May 2020, all Jones snowboards and splitboards are made with 100% solar power. Switching our snowboard and splitboard production to 100% solar made a 89% reduction in CO2 compared to non-solar powered production.

Bio Resin

Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes.

100% recycled ABS

Since 2014, all of our snowboards and splitboards have been built with recycled ABS sidewalls. We've used 847 miles of sidewalls since switching to recycled ABS.

Wend Bio Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with Wend natural wax, a plant blend and biodegradable wax that is also non-toxic.

Sustainably sourced woodcores

All Jones woodcores are made with sustainably sourced wood. Every piece of wood we use in every board comes from a responsibly managed forest.

Technology

Highlights

Fusion Carbon

Fusion Carbon

This cutting edge board lay-up process is the latest evolution of our previous Fusion Tech construction and reduces board weight and improves durability by combining board materials in two stages.

Power Plates

Power Plates

New wood core design featuring specially positioned dual-layers plates on both sides of the insert packs that help transfer energy, enhance board response and improve edge impact durability.

Premium sintered base

Premium sintered base

Life's too short to ride slow bases! All our boards have hyper fast sintered bases made from super durable and wax absorbant premium P-tex. See the tech features for specific base details.

Factory tuned, ready to shred

Factory tuned, ready to shred

Buy it, mount it, rip it! All boards leave the factory ready to ride with de-tuned tip + tail, edges angled at 90°/0° and bases waxed with Wend natural wax.

Built for SkateTech bindings

Built for SkateTech bindings

Like peanut butter and jelly, the Traction Tech edge bump pattern aligns perfectly with SkateTech bindings for unreal response and edge grip.

Forever Flex

Forever Flex

Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Sustainably made, built by the sun

Sustainably made, built by the sun

We strive to make gear with the least carbon footprint possible. All boards built with Bio Resin, recycled sidewalls + edges and sustainably sourced woodcores + topsheets. Jones boards are also now built with 100% solar power!

Traction Tech edges

Traction Tech edges

Like a serrated knife slicing into the snow, Traction Tech improves your edge grip on firm snow.

100% 3D Contours Base

100% 3D Contours Base

Welcome to the future. 3D Contour Bases are next-level tech that enhances glide + float and delivers unmatched turn flow and fluidity in any snow condition.

Sustainably sourced woodcore

Sustainably sourced woodcore

All Jones woodcores are made from wood species that have been sustainably grown and harvested. See the tech features page for more details.

Ultra Construction

Ultra Construction

Ultra Construction is the redefinition of what it takes to build a snowboard.We’ve tested every inch of the board to precisely position materials exactly where they are needed while eliminating all excess materials.

Technology

Features & Construction

3D Contour Base 3.0

Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

About 3D Contour Bases

3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.

Read More

1. Traction Tech 3.0

Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

2. Progressive sidecut

At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Tapered shape, 12.5 mm

The tapered shape sinks the tail in pow for better float and quicker turns.

Blunt nose

How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones

Directional Flex Pattern

Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.

V-Core

Jones exclusive wood core profiling that offers a stable and playful board feel. The wood core is softer between the feet for easy turn initiation and stiffer in the nose and tail for stability riding through uneven terrain and landing airs.

Directional Rocker

A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

"My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls." - Jeremy Jones

Built with the finest tech and materials

100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.


Base

Ultra Base

Jones exclusive base material that sets new performance standards. Lab results and snow testing show 25% better wax absorption, better glide in warm/wet snow and better durability for grinding. We’ve also doubled the amount of wax and mixed multiple wax types for a faster factory wax in a wider range of conditions.

Wend Natural Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.


Construction

Power Plates

Wood core design featuring specially positioned dual-layer plates on both sides of the insert packs that help transfer energy, enhance board response and improve edge impact durability. The bottom layer of the Power Plate is made from super responsive and sustainable Bamboo. The top layer is made from rubber to improve dampening and reduce edge chatter under your bindings.

Fusion Carbon

This cutting edge board lay-up process is the latest evolution of our previous Fusion Tech construction and reduces board weight and improves durability by combining board materials in two stages.

Ultra Construction

Ultra Construction is the redefinition of what it takes to build a snowboard.We’ve tested every inch of the board to precisely position materials exactly where they are needed while eliminating all excess materials. Combining these innovative construction techniques with superlight wood cores and carbon fiber deliver revolutionary results.


Fiber

Triax fiberglass

Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.


Insert pack

Float Pack

Allows super setback stance for deep pow days.


Other features

Recycled ABS Sidewalls

ABS Plastic is one of the necessary evils of snowboard production. We improve the sustainability of our snowboards by using only recycled plastic.

Factory Tuned

All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Forever Flex

Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Oversized recycled edges

All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Bio Resin

Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.


Topsheet

Ash wood veneer

This ash wood veneer top layer delivers added responsiveness and is the most natural way to find the best balance between absorption and pop.


Woodcore

Power Core

Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Know your board

Men's Ultra Flagship Snowboard specifications
Board Size (cm) 158 161 162 164 165
Board Weight 2,5kg / 5,5lbs 2,7kg / 5,94lbs 2,7kg / 5,94lbs 2,7kg / 5,94lbs 2,8kg / 6,16lbs
Surface Area (dm2) 40,97 42,13 44,12 43,31 45,51
Contact Length (cm) 106,6 109 110 111,6 112,4
Effective Edge Length (cm) 117,6 120 121 122,6 123,4
Tip Length (cm) 32,7 33 33 33,2 33,3
Tail Length (cm) 18,7 19 19 19,2 19,3
Waist Width (cm) 24,9 25,2 26,3 25,4 26,6
Underfoot Width - Front Foot (cm) 26,46 26,68 27,75 26,85 28,04
Underfoot Width - Rear Foot (cm) 25,91 26,17 27,25 26,35 27,54
Tip Width (cm) 29,4 29,6 30,7 29,9 31,1
Tail Width (cm) 28,1 28,3 29,4 28,6 29,8
Sidecut Radius (m) 8,5 9,1 9,3 9,3 9,4
Taper (cm) 1,2 1,2 1,2 1,2 1,2
Reference Stance (cm/in) 60 / 23,6 60 / 23,6 60 / 23,6 60 / 23,6 60 / 23,6
Centered Stance (cm/in) 58 / 22,8 58 / 22,8 58 / 22,8 58 / 22,8 58 / 22,8
Insert Pack Float Pack Float Pack Float Pack Float Pack Float Pack
Stance Setback (cm) 2 2 2 2 2
Board specs schema

The dimensions of a snowboard define how that board performs on snow. The dimension specs of all our models are fine tuned for specific styles of riding. Understand how waist width, flex and sidecut and stance dimensions effect board performance to find the best board for you.

Designed to work together

Designed to work together

mix and match

The flex and response on the Men's Apollo Snowboard Binding has been tuned to enhance the signature turn performance and board feel of the Men's Ultra Flagship Snowboard.

Real reviews from real riders