Jones Ultralight Hovercraft Splitboard 2.0

  • out of stock

The ultralight backcountry racer

Ideal for expedition touring and high alpine assaults

The Ultralight Hovercraft 2.0 Split is an ultralight split made for expeditions and epic days in the alpine. Featuring a tapered directional shape and a long sidecut, it charges in any snow and offers suprisingly diverse performance for its compact size. It's designed to be rock solid in rough and committing technical terrain.

Key Benefits

Key Benefits

  • Fusion Carbon construction to reduce weight
  • Medium flex + tapered shape for nimble float
  • Directional rocker profile for power and grip
  • Long sidecut for stability at speed
  • 3D Contour Base for ultra fast glide and fluid turn intiation
  • Boltless bridge and Karakoram 3C Clips for a tight board connection

Terrain

On-Piste / All-Mountain 7/10

Freeride / Powder 10/10

Freestyle / Park 2/10

On-Piste / All-Mountain 7/10

Freeride / Powder 10/10

Freestyle / Park 2/10

Riding Level

Beginner

Intermediate

Expert

Personality/Flex

Soft & Playful

Happy Medium

Stiff & Powerful

Speed & Turn shape

Slow & Short

Do-It-All Turner

Fast & Long

Environmental and social responsibility

Proud member of 1% For The Planet Proud member of 1% For The Planet
Built with 100% solar power Built with 100% solar power
Bio Resin Bio Resin
100% recycled ABS 100% recycled ABS
Wend Bio Wax Wend Bio Wax
Sustainably sourced woodcores Sustainably sourced woodcores

Proud member of 1% For The Planet

Your purchase supports grassroots organizations. We donate 1% of every sale to environmental causes though our partnership with 1% For The Planet.

Built with 100% solar power

As of May 2020, all Jones snowboards and splitboards are made with 100% solar power. Switching our snowboard and splitboard production to 100% solar made a 89% reduction in CO2 compared to non-solar powered production.

Bio Resin

Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes.

100% recycled ABS

Since 2014, all of our snowboards and splitboards have been built with recycled ABS sidewalls. We've used 847 miles of sidewalls since switching to recycled ABS.

Wend Bio Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with Wend natural wax, a plant blend and biodegradable wax that is also non-toxic.

Sustainably sourced woodcores

All Jones woodcores are made with sustainably sourced wood. Every piece of wood we use in every board comes from a responsibly managed forest.

Ultralight Hovercraft Splitboard 2.0

$1,700.00

Help find my size
Size chart

SKU: J.24.SPU.UCR.XX.152.1

This order ships free!

Free 2-5 days shipping for all orders over $75

check delivery dates.

All Jones snowboards and splitboards are backed with a 2 year warranty + 1 free year extension.

Learn more

Designed to fit perfectly

Designed to fit perfectly

mix and match

Jones Pre-cut skins are laser cut to perfectly match the edge contours of Jones splits and are skin track ready right out of the box.

The ultralight backcountry racer

Ideal for expedition touring and high alpine assaults

The Ultralight Hovercraft 2.0 Split is an ultralight split made for expeditions and epic days in the alpine. Featuring a tapered directional shape and a long sidecut, it charges in any snow and offers suprisingly diverse performance for its compact size. It's designed to be rock solid in rough and committing technical terrain.

Key Benefits

Key Benefits

  • Fusion Carbon construction to reduce weight
  • Medium flex + tapered shape for nimble float
  • Directional rocker profile for power and grip
  • Long sidecut for stability at speed
  • 3D Contour Base for ultra fast glide and fluid turn intiation
  • Boltless bridge and Karakoram 3C Clips for a tight board connection

Terrain

On-Piste / All-Mountain 7/10

Freeride / Powder 10/10

Freestyle / Park 2/10

On-Piste / All-Mountain 7/10

Freeride / Powder 10/10

Freestyle / Park 2/10

Riding Level

Beginner

Intermediate

Expert

Personality/Flex

Soft & Playful

Happy Medium

Stiff & Powerful

Speed & Turn shape

Slow & Short

Do-It-All Turner

Fast & Long

Environmental and social responsibility

Proud member of 1% For The Planet Proud member of 1% For The Planet
Built with 100% solar power Built with 100% solar power
Bio Resin Bio Resin
100% recycled ABS 100% recycled ABS
Wend Bio Wax Wend Bio Wax
Sustainably sourced woodcores Sustainably sourced woodcores

Proud member of 1% For The Planet

Your purchase supports grassroots organizations. We donate 1% of every sale to environmental causes though our partnership with 1% For The Planet.

Built with 100% solar power

As of May 2020, all Jones snowboards and splitboards are made with 100% solar power. Switching our snowboard and splitboard production to 100% solar made a 89% reduction in CO2 compared to non-solar powered production.

Bio Resin

Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes.

100% recycled ABS

Since 2014, all of our snowboards and splitboards have been built with recycled ABS sidewalls. We've used 847 miles of sidewalls since switching to recycled ABS.

Wend Bio Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with Wend natural wax, a plant blend and biodegradable wax that is also non-toxic.

Sustainably sourced woodcores

All Jones woodcores are made with sustainably sourced wood. Every piece of wood we use in every board comes from a responsibly managed forest.

Technology

Highlights

Karakoram Ultra Clips 3C with Tip-Lock

Karakoram Ultra Clips 3C with Tip-Lock

All new Karakoram Ultra Clips 3C featuring a three point tension system. Ultralight and exclusive to Jones, these clips redefine split clip technology. They are also adjustable so you can maintain even compression as your splitboard ages.

Premium sintered base

Premium sintered base

Life's too short to ride slow bases! All our boards have hyper fast sintered bases made from super durable and wax absorbant premium P-tex. See the tech features for specific base details.

Fusion Carbon

Fusion Carbon

This cutting edge board lay-up process is the latest evolution of our previous Fusion Tech construction and reduces board weight and improves durability by combining board materials in two stages.

Factory tuned, ready to shred

Factory tuned, ready to shred

Buy it, mount it, rip it! All boards leave the factory ready to ride with de-tuned tip + tail, edges angled at 90°/0° and bases waxed with Wend natural wax.

Ultra Construction

Ultra Construction

Ultra Construction is the redefinition of what it takes to build a snowboard.We’ve tested every inch of the board to precisely position materials exactly where they are needed while eliminating all excess materials.

Boltless Bridge

Boltless Bridge

Less hardware, more power. The Bolt-less Bridge eliminates split clip hardware from the base of the board and enhances split connection by re-profiling the woodcore under the clips.

Quick tension tail clip

Quick tension tail clip

Jones exclusive climbing skin tension system that attaches to pre-cut tail notches and eliminates the need for a traditional skin tail clip.

Sustainably sourced woodcore

Sustainably sourced woodcore

All Jones woodcores are made from wood species that have been sustainably grown and harvested. See the tech features page for more details.

3D Contours Base

3D Contours Base

Welcome to the future. 3D Contour Bases are next-level tech that enhances glide + float and delivers unmatched turn flow and fluidity in any snow condition.

Inner/Outer Traction Tech edges

Inner/Outer Traction Tech edges

Lock in up and down. Traction Tech on inside and outside split edges improves grip on icy skintracks or firm descents.

Sustainably made, built by the sun

Sustainably made, built by the sun

We strive to make gear with the least carbon footprint possible. All boards built with Bio Resin, recycled sidewalls + edges and sustainably sourced woodcores + topsheets. Jones boards are also now built with 100% solar power!

Forever Flex

Forever Flex

Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Koroyd

Koroyd

Koroyd is the lightest, most advanced damping core material we've ever tested. Koroyd absorbs vibrations and adds response at a fraction of the weight which enhances control and confidence.

Technology

Features & Construction

3D Contour Base 3.0

Freeride focused 3D-base contours featuring an even balance of 12mm of spoon bevel in the nose. Spoon bevel starts at the rocker point.

About 3D Contour Bases

3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.

Read More

1. Inside & outside Traction Tech 2.0

Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

Inner edge Traction Tech

Inner edge Traction Tech improves splitboard edge grip on ascent. Three sidecut bumps on each side of your binding keep your locked in on icy skin tracks no matter which way you are traversing.

2. Progressive sidecut

At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

3. Quick Tension Tail Clip

Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.

4. Boltless Bridge

The Boltless Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker, providing better torsional stiffness and a more powerful connection at the split clips.

Directional flex pattern

Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.

Blunt nose

How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones

Directional Rocker

A hybrid rocker/camber flex pattern defined by more tip rocker than tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

"My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls." - Jeremy Jones

Built with the finest tech and materials

100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.


Base

Ultra Base

Jones exclusive base material that sets new performance standards. Lab results and snow testing show 25% better wax absorption, better glide in warm/wet snow and better durability for grinding. We’ve also doubled the amount of wax and mixed multiple wax types for a faster factory wax in a wider range of conditions.

Wend Natural Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.


Construction

Fusion Carbon

This cutting edge board lay-up process is the latest evolution of our previous Fusion Tech construction and reduces board weight and improves durability by combining board materials in two stages.

Ultra Construction

Ultra Construction is the redefinition of what it takes to build a snowboard.We’ve tested every inch of the board to precisely position materials exactly where they are needed while eliminating all excess materials. Combining these innovative construction techniques with superlight wood cores and carbon fiber deliver revolutionary results.

Koroyd New

Koroyd is the lightest, most advanced damping core material we've ever tested. Koroyd absorbs vibrations and adds response at a fraction of the weight which enhances control and confidence.


Extra hardware

Karakoram Ultra clips 3C with Tip-Lock New

All new Karakoram Ultra Clips 3C featuring a three point tension system. Ultralight and exclusive to Jones, these clips redefine split clip technology. They are also adjustable so you can maintain even compression as your splitboard ages.


Other features

Recycled rounded ABS

Rounded sidewall finish that improves board durability by protecting topsheet from chipping.

Bio Resin

Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.

Factory Tuned

All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Forever Flex

Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Inner thin recycled edges

Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm, inside edges are 1.5mm.

Outer oversized recycled edges

Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm, inside edges are 1.5mm.

Stainless steel reinforcement

Stainless steel plates are embedded into the nose and tail for improved board tip durability.


Reinforcements

Fiberglass reinforcement

Fiberglass layer improve pop in nose and tail plus increases the longevity of the flex profile. This lightweight layer helps the board perform the same on day 100 as it did on day one - precise and playful.


Topsheet

Ultralight Eco-Plastic Topsheet

Super damp, durable and lightweight topsheet material made from organic plant material.


Woodcore

Fusion Core

The new Fusion Core is our lightest wood core yet. Core is made from mostly paulownia with specifically positioned pockets of poplar for improved durability and response.

Know your board

Ultralight Hovercraft Splitboard 2.0 specifications
Board Size (cm) 152 156 160
Board Weight 2,6kg / 5,72lbs 2,7kg / 5,94lbs 2,7kg / 5,94lbs
Surface Area (dm2) 39,41 41,1 42,83
Contact Length (cm) 97,3 100,5 103,7
Effective Edge Length (cm) 119,3 122,5 125,7
Tip Length (cm) 39,6 40 40,4
Tail Length (cm) 15,1 15,5 15,9
Waist Width (cm) 25,9 26,3 26,7
Underfoot Width - Front Foot (cm) 26,8 27,24 27,67
Underfoot Width - Rear Foot (cm) 26,27 26,7 27,13
Tip Width (cm) 30,6 31,1 31,6
Tail Width (cm) 28,9 29,4 29,9
Sidecut Radius (m) 8,7 9 9,3
Taper (cm) 1,7 1,7 1,7
Reference Stance (cm/in) - - -
Centered Stance (cm/in) 54 / 21,2 56 / 22,0 58 / 22,8
Insert Pack Standard Pack Standard Pack Standard Pack
Stance Setback (cm) 0 0 0
Board specs schema

The dimensions of a snowboard define how that board performs on snow. The dimension specs of all our models are fine tuned for specific styles of riding. Understand how waist width, flex and sidecut and stance dimensions effect board performance to find the best board for you.

Designed to fit perfectly

Designed to fit perfectly

mix and match

Jones Pre-cut skins are laser cut to perfectly match the edge contours of Jones splits and are skin track ready right out of the box.

The evolution of a legend

Hovercraft 2.0

After fourteen seasons, we are excited to debut a completely redesigned Hovercraft Series that not only builds on its performance legacy, but also sets a new standard in responsible snowboard production.

Real reviews from real riders