Aviator 2.0 Snowboard

$549.95

Jones Aviator 2.0 Snowboard

    Coming soon
Jones Men’s Aviator 2.0 Snowboard
Jones Men’s Aviator 2.0 Snowboard, close up detail
Jones Men’s Aviator 2.0 Snowboard, close up detail
Jones Men’s Aviator 2.0 Snowboard
Jones Men’s Aviator 2.0 Snowboard
Jones Men’s Aviator 2.0 Snowboard close up detail
Jones Men’s Aviator 2.0 Snowboard close up detail
Jones Men’s Aviator 2.0 Snowboard close up detail
jones 360 icon
Jones Men’s Aviator 2.0 Snowboard
Jones Men’s Aviator 2.0 Snowboard, close up detail
Jones Men’s Aviator 2.0 Snowboard, close up detail
Jones Men’s Aviator 2.0 Snowboard
Jones Men’s Aviator 2.0 Snowboard
Jones Men’s Aviator 2.0 Snowboard close up detail
Jones Men’s Aviator 2.0 Snowboard close up detail
Jones Men’s Aviator 2.0 Snowboard close up detail

The completely re-designed Aviator is a hard charging directional twin built for expert all-mountain riders who like to rail turns and stomp airs anywhere on the mountain.

This new edition of the Aviator was designed in collaboration with Jones team riders Victor de le Rue and Jimmy Goodman. What sets the Aviator apart is its FULL CAMBER profile. Victor and Jimmy swear by the power of full camber for edging on steeps and landing tricks on the tail. The Aviator also features a 3D Contour Base 2.0, Triax Fiberglass, Carbon/Innegra Reinforcement, an ECO-Plastic topsheet and Traction Tech 3.5 edges. The 3D Contour Base starts after the contact point and helps eliminate edge catch and improve turn fluidity while the Triax fiberglass and Carbon Innegra layer under the Eco-Plastic topsheet suck up board chatter and offer supreme pop and lightning fast response to your every movement.

Art by: RP Roberts

Aviator 2.0 Snowboard

High flying performance

Ideal for high performance all-mountain charging and carving

$549.95

Size: 158
Size chart

SKU: J.22.SNM.AVI.XX.158.1

flake
Your purchase supports grassroots organizations.

All Jones snowboards and splitboards are backed with a 2 year warranty + 1 free year extension.

Learn more

Free shipping on all orders over $75.

check delivery dates.

The completely re-designed Aviator is a hard charging directional twin built for expert all-mountain riders who like to rail turns and stomp airs anywhere on the mountain.

This new edition of the Aviator was designed in collaboration with Jones team riders Victor de le Rue and Jimmy Goodman. What sets the Aviator apart is its FULL CAMBER profile. Victor and Jimmy swear by the power of full camber for edging on steeps and landing tricks on the tail. The Aviator also features a 3D Contour Base 2.0, Triax Fiberglass, Carbon/Innegra Reinforcement, an ECO-Plastic topsheet and Traction Tech 3.5 edges. The 3D Contour Base starts after the contact point and helps eliminate edge catch and improve turn fluidity while the Triax fiberglass and Carbon Innegra layer under the Eco-Plastic topsheet suck up board chatter and offer supreme pop and lightning fast response to your every movement.

Art by: RP Roberts

Board Personality

Freestyle / Park

Deep Powder

Slow Speed Slashing

High Speed Carving

Steeps / Technical

Icy Edging

Flex

8
Precise

Awards

Aviator 2.0 Snowboard's award
Aviator 2.0 Snowboard's award
Aviator 2.0 Snowboard's award

Technology

Highlights

Sustainable Flax/Basalt Power stringers

Sustainable Flax/Basalt Power stringers

Sustainable strength. Jones exclusive Flax / Basalt stringers are made with 100% natural fibers and help transfer power to the edges and absorb board chatter.

Premium sintered base

Premium sintered base

Life's too short to ride slow bases! All our boards have hyper fast sintered bases made from super durable and wax absorbant premium P-tex. See the tech features for specific base details.

Koroyd

Koroyd

Koroyd is the lightest, most advanced damping core material we've ever tested. Koroyd absorbs vibrations and adds response at a fraction of the weight which enhances control and confidence.

Built for SkateTech bindings

Built for SkateTech bindings

Like peanut butter and jelly, the Traction Tech edge bump pattern aligns perfectly with SkateTech bindings for unreal response and edge grip.

Forever Flex

Forever Flex

Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Traction Tech edges

Traction Tech edges

Like a serrated knife slicing into the snow, Traction Tech improves your edge grip on firm snow.

100% 3D Contours Base

100% 3D Contours Base

Welcome to the future. 3D Contour Bases are next-level tech that enhances glide + float and delivers unmatched turn flow and fluidity in any snow condition.

Triax Fiberglass

Triax Fiberglass

Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

3D Contour Base 2.0

Moderate 3D-base contours featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.

About 3D Contour Bases

3D Contour Bases are designed to make every run smoother and every turn more effortless by reducing the drag of the board tips. 3D Contour Bases enhance glide and improve float helping you ride faster and with better flow.

Read More

1. Traction Tech 3.5

Traction Tech 3.5 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

2. Progressive sidecut

At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt nose

How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones

Directional flex pattern

Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.

V-core

Jones exclusive wood core profiling that offers a stable and playful board feel. The wood core is softer between the feet for easy turn initiation and stiffer in the nose and tail for stability riding through uneven terrain and landing airs.

True Camber

A traditional full camber profile that offers the insane edge response of camber without the usual hang-ups. The camber radius tapers into the beveled 3D Contour Base at the tips which releases the edges where they like to hook and balances the pop and directional stability of camber with a looser, less-catchy feel.

Built with the finest tech and materials

100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.


Base

Sintered 8000 Base

New super durable material made from Ultra High Molecular Weight Polyethylene (UHMW-PE) and carbon. Base is easily repairable, highly wax absorbent and wicked fast.

Wend Natural Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.


Construction

Koroyd New

Koroyd is the lightest, most advanced damping core material we've ever tested. Koroyd absorbs vibrations and adds response at a fraction of the weight which enhances control and confidence.


Fiber

Triax fiberglass

Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.


Other features

Bio Resin

Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.

Oversized recycled edges

All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Recycled ABS Sidewalls

ABS Plastic is one of the necessary evils of snowboard production. We improve the sustainability of our snowboards by using only recycled plastic.

Factory Tuned

All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Forever Flex

Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.


Reinforcements

Sustainable Flax/Basalt Power stringers

Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to eliminate nose and tail chatter.


Topsheet

Eco-plastic topsheet

Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).


Woodcore

Power Core

Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Real reviews from real riders

ethics

High performance,
sustainably made gear.

We design gear that balances performance, durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2021, all our snowboards and splitboards are molded with Super Sap Bio-Resin.

Proud member of 1% For The Planet, we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.

pow 1% for the planet factory solar
Read more